Home   About Us    GMAW(MIG/MAG)    GTAW(TIG)    MMAW(Stick Electrodes)    Plasma Cutting    TBI Torches    Virtual Welding    Accessories    Contact Us   


Cold Metal Transfer 

-TransPuls Synergic 2700 CMT

-TransPuls Synergic 3200 CMT 

-TransPuls Synergic 4000 CMT 

-TransPuls Synergic 5000 CMT    

High Speed High Deposition Power Sources

-Time 5000 Digital

-Time Twin Digital 

-Laser Hybrid

-Zuper Inverter 400i

Inverter Power Sources

-VarioStar 1500

-VarioStar 2500

-VarioStar 3100

-VarioSynergic 3400

-VarioSynergic 4000

-VarioSynergic 5000

-Zuper Arc 300/400


Zuper Series(MIG/MAG) Welding Outfits


TransPuls Synergic 2700 CMT

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.

  • Portable pulse welding with 270 A

  • Welds sheets of 0.3 mm or thicker

  • For manual and robot applications

CMT stands for Cold Metal Transfer. The wire movement is incorporated into the process control, where heat is inserted only very briefly. Metal transfer takes place with barely any flow of current. The result is spatter-free MIG/MAG welding and brazing of thin sheets (0.3 mm or thicker), MIG brazing of galvanised sheets and the joining of steel and aluminium.

Technical Data

Mains voltage

3 x 400 V

Mains voltage tolerance

+ 15 % / - 15 %

Mains frequency

50 / 60 Hz

Mains fuse protection

16 A

Primary continuous current (100 %)

6,6 A

Primary continuous power (kVA)

4,5 - 8,7 kVA

Cos phi


Degree of efficiency


Welding current range MIG/MAG

3 - 270 A

Welding current range TIG

3 - 270 A

Welding current range, electrode

10 - 270 A

Duty cycle at 10 min/40 C (104 F)

40 % d.c. at 270 A

Duty cycle at 10 min/40 C (104 F)

100 % d.c. at 170 A

Open-circuit voltage

50 V

Working voltage MIG/MAG

14,2 - 27,5 V

Working voltage TIG

10,1 - 20,8 V

Working voltage Electrode

20,4 - 30,8 V


IP 23

Type of cooling


Insulation class


Dimensions l/w/h mm


Dimensions l/w/h (inches)


Weight kg


Weight lb


Marks of conformity


Marks of conformity





Plasma Machines Consumables (Hypertherm / Kjelberg / Placut / ESAB )  Kindly visit    www.egpsales.com

CNC Plasma & Flame Cutting Kindly visit    www.egpsales.net


Copyright EGP Sales Corporation. All Rights Reserved.